EAC Declaration of Conformity to Technical Regulations of the Eurasian Economic Union

EAC Declaration of Conformity to Technical Regulations of the Eurasian Economic Union is evidence that the products meet the minimum requirements of the Technical Regulation of the Eurasian Economic Union (EAEU), former Eurasian Custom Union (EACU). This ensures that products are safe both for consumers and the environment.

The declaration must be registered in the uniform register of the Eurasian Economic Union by a national producer or an . A declaration registered in the Eurasian Economic Union is valid in the whole Economic Union. According to the Decision of the Ministery for economic development in Russia of July 31st, 2020 n. 478, since Jannuary 1st, 2021 the accredited certification bodies are no longer authorized to register EAC declarations in the unified register of the Eurasian Economic Union.

The existence of an EAC declaration registered in the unified register of the EAEU is a prerequisite for placing products on the market in Russia, Belarus, Kyrgyzstan, Kazakhstan and Armenia.

Legal framework

The legal basis for the EAC declaration involves following agreements:

As a consequence of the coordination of national safety standards, the previous national Technical Regulations such as Russian GOST and TR certification were gradually phased out and substituted by the new Technical Regulations of the EAEU (TR CU or TR EAEU) in every industrial sector. The new EAC certification and EAC declaration were introduced in the EAEU as a simpler and more cost-effective form of proof of conformity.

Application area

The EAC certification and EAC declaration are required for all products, which are listed in the common list of products to be certified within the EAEU under the board decision of the EAEU No. 620 from 07.04.2011 .

The complete list of products, which require EAC declaration is available here.

Technical Regulations TR CU and TR EAEU

So far, 48 technical regulations have been adopted in the Eurasian Economic Union, which must be used for EAC declaration. Several sets of rules are currently being developed or are already being discussed at the Union level.

The technical regulations TR CU and TR EAEU are basically the counterpart of Eureopean CE directives, or more precisely EU regulations. TR CU is abbreviation of Customs UnionTechnical Regulations an TR EAEU is an abbreviation of Economic Union Technical Regulations, smiliar to the designation of CE directives e.g. Directives 2006/42/EC and 2011/65/EU. More on this topic you can find in our articles: "Which one is correct: TR CU certificate or EAC certificate?" and "Differences between EAC Certificate and EAC declaration".

The technical regulations set minimum requirements for the safety of the respective products. The conformity of the products with the regulations is declared by EAC declaration by the manufacturer or its representative. After successful conformity assessment, the products are marked with the EAC conformity mark. The EAC marking declares that the product complies with the applicable safety requirements of the technical regulations. Only then the product can be placed on the EAEU market for free circulation.

The procedure of EAC conformity assessment

An EAC declaration is made by the producer, importer or power of attorney and entered into the uniform register on request of the applicant to the accredited certifying body.

Depending on the purpose of the EAC declaration, different schemes can be applied: for serial production or for single-supply.

Batch (intended for batch delivery): all of the specified quantity of manufactured units with the same name and designation as indicated in the Certificate of Conformity and intended for sale.

Product Unit: A single piece or quantity of product.

These and other definitions related to EAC Conformity Assessment are available in GOST 31894-2012 Terms and definitions in the field of conformity assessment (confirmation).

According to the certification process, the EAC declarations are valid for up to 5 years.

An EAC declaration may only be applied for by a company established in the territory of the EAEU. Therefore an authorized representative within the EAEU is required. If you need an authorized representative, we will be pleased to offer you a suitable company that takes over this function.

As a proof of conformity with the requirements of the EAEU when registering a EAC declaration, audit reports as well as test reports from a notified body may be required.

The EAC declaration process is usually comprised of the following steps:

  1. Step: Define under which technical rules the product falls.
  2. Step: Select the scheme the conformity assessment process is to follow.
  3. Step: Perform tests and record results properly.
  4. Step: If the results are positive, prepare the necessary documents. These are listed in the corresponding Technical Regulations.
  5. Step: The declaration is issued.
  6. Step: The declaration and the documents must be entered in the unified register of the Eurasian Economic Union

Schemes of conformity assessment

All technical regulations contain detailed descriptions of the EAC declaration, the so called schemes. The selection of the scheme depends on the characteristics of the product, the production process and the delivery. The schemes of conformity assessment can be considered the counterpart of the conformity assessment modules according to the UE-directive 768/2008/EG in the Eurasian Economic Union.

Required documents

Technischen Unterlagen für die EAC Zertifizierung: Technischer Pass, Bedienungsanleitung, Sicherheitsbetrachtung, Druckbehälterpass nach TR ZU
Each technical regulation of the EAEU requires different documentation. Typically these are:

EAC declaration contains the following information:

  • address and name of the manufacturer
  • list of declared products
  • customs tariff number
  • applied standards of the Technical Regulation
  • data on the test center
  • period of validity
  • registration number
  • data on the notified body

EAC certification

EAC Zertifikat

In addition to the EAC declaration, the EAC Certification also exists as another form of official proof that the products comply with the national Technical Regulations of the participating countries.

The EAC certificate and the EAC declaration have the same validity. The products listed in the board decision of the EAEU No. 620 from 07.04.2011 require a EAC certification or a EAC declaration.

Differences between an EAC Certificate and an EAC Declaration

Criteria EAC Certificate EAC Declaration
Applicant producer, importer, person with power of attorney producer, importer, person with power of attorney
Classification of products made by the certifying body made by the applicant
Proof of conformity based on the test report of the accredited test laboratory based on applicant's own evidence or the test report of the accredited test laboratory
Quality assurance comprehensive production audit through the certifying body or external ISO 9001 certification quality assurance is done by the applicant
Issuing of the certificate of conformity certification body on an official form applicant on a normal sheet of paper
Registration of the certificate of conformity certification body applicant or certification body
Validity 1 to 5 years, depending on the regulation 1 to 5 years, depending on the regulation
Responsibility lies with the certification body lies with the applicant
Surveillance certification body -

Authorised Representative

Authorised Representative Russia, Kazakhstan and EAEUIf the producer doesn't have a location in the EAEU, it does not have the right to apply for a required conformity assessment of its products. In order to still be able to be the subject of a conformity assessment, the foreign producer must give a representative in the EAEU power of attorney. They will defend the interests of the foreign producer when working with the certifying bodies with regard to safety and quality of products and in accordance with technical regulations.

Obligatory product marking

TR CU Declaration, EAC, EACU

Products for which a EAC declaration has been issued and registered need to be marked with the Eurasian Conformity Mark in accordance with the decision of the board of the Customs Union Commission No. 711 from 15.07.2011. This proves its conformity to all legal requirements of the EAEU. The placing on the market of products without an appropriate EAC marking can be punished with a fine and confiscation.

We recommend taking the EAC declaration of goods seriously, in order to avoid possible negative consequences.

Optional certification

If your products are not subject to compliance with EAC standards and you need a confirmation of the safety and high quality of your products, we can offer you a GOST Certification for the Russian and Kazakh market.

Period of validity of EAC declaration

The validity period of the EAC declaration differs depending on the applied technical regulations, the selected scheme, the type of production (serial production, individual delivery, etc.) and equipment and ranges on average from one to 5 years. Those parameters are determined in the respective technical regulation.

Detailed information on the period of validity of EAC declarations can be found here.

Duration and costs for EAC declaration

The duration and costs associated with an EAC declaration application depend on several different factors, such as the classification of the product, any required laboratory checks and the complexity of all examinations. As such the exact conditions of the EAC declaration are always determined individually based on the required documentation.
Please note that an application for an EAC declaration can take several weeks to process.

Detailed information on the duration and costs of EAC declarations can be found here.

Delivery of the documentation

If you order the EAC declaration, you will receive a copy of it via email immediately after our successful certification procedure. The original document and two certified copies will be sent by post.